gas fracking

显示标签为“Hydraulic Fracturing Proppants”的博文。显示所有博文
显示标签为“Hydraulic Fracturing Proppants”的博文。显示所有博文

2015年5月9日星期六

Performance agent support structure

Proppant to have a certain size and natural gas fracturing of the natural sand or synthetic high-strength ceramic particles. Ceramic proppant (ceramic proppant) to bauxite as raw material by powder granulation, sintering, high temperature, high pressure, corrosion resistance, high strength, high conductivity, low density, low breakage rate, etc. , the most widely used. In the resin-coated sand or ceramic surface, Hydraulic Fracturing Proppants is possible to further improve the strength and conductivity properties of the proppant. Proppant and supported by the fracturing fluid into the formation of cracks in the fracture, thereby effectively imported oil and gas wells, a substantial increase oil and gas production and extend well life.

2015年4月1日星期三

Common criteria of proppant, quartz sand,frac sand


Natural quartz sand,( proppant sand manufacturers ) Tao Lisha, aluminum oxide and silicate proppants, artificial support agent is oil and gas production on the market commonly used standard proppant.

  Quartz is main component of crustal composition in nature. Part exists in silicate compound state, oil fracturing proppant , constitute a variety of minerals and rocks. Another part is to the independent state of existence, a separate mineral entity.

  Although they have the same chemical composition, Hydraulic Fracturing Proppants , which are SiO2, but because the petrogeneticmetallogenetic conditions are different, and there are many kinds of state and a paramorph.


2015年1月12日星期一

Ceramic proppant demand for oil rising rapidly increasing

Petroleum proppant known as oil fracturing proppant . After deep mining at the oil and gas, high pressure low permeability Deposits closed after fracturing treatment, the rock cracked hydrocarbon, oil and gas passage from the cracks formed collection out, then need to inject fluid rock grassroots to exceed formation fracture pressure strength, so that cracks the rock around the wellbore to form a channel with a high-level flow capacity to keep the cracks open after fracturing the formation of oil and gas product can smoothly pass. Petroleum lightweight proppant along with high-pressure solution is filled into the formation in rock fissures, cracks do not play a supporting closed due to stress release effect, thereby maintaining high conductivity, so that oil and gas flow, increase production.

Oil fracturing proppant equipment, is summed up in the basis of our previous production of ceramic sand production line equipment, drawing on a number of technical advantages of domestic export enterprises ultra lightweight proppant used, and with Henan University and other key state institutions and laboratory cooperation, through each section of the production line equipment, structure, configuration, operation, improvement and optimization of testing and other aspects, so that oil fracturing proppant ceramic sand production equipment have greatly improved in quality, production, operating costs and so on. The ceramic sand production equipment to meet the production process of oil fracturing proppant suppliers products. Capable of producing anti-fragmentation and 69Mpa to 53Mpa conventional products, and anti-fragmentation of 86MPa and 102Mpa products, grain diameter of 0.2 ~ 0.9mm, in full compliance with Q / SH0051-2007 standards.

2015年1月8日星期四

How to produce high-quality oil fracturing proppant

Oil fracturing proppant production process, increase the moisture in the spray granulation process required to evaporate the moisture also increase, which will cause the particles to form a small hole in its strength reduces water evaporation fracking process , while there will be particles of roundness unbalanced shape, that is not too small particles of irregular shape. Under the formula remains unchanged, if the water is less than the mud 20mas%, because the flow is too low and will not be out of the ball mill, ball mill will be trapped in the mud. Some will even out of stagnation in the pipe mill and mixing tank between, so that production can not be along the line; if the water is greater than the mud 28 mass%, so all of them can flow into the mud stirred tanks. However, due to excessive moisture, proppant production in spray granulation process smaller particles, about 90% of the particles between 0.1-0.2 mm, reach the next step process requirements, while extending the time required for dehydration, cause the particles are not completely dry falls splice apparatus, causing mutual bonding between the particles and the particles together to form larger irregular particles, can not play the advantages of spray granulation, under the influence of anterograde step process.

2014年12月12日星期五

Progress fracturing fluid

single guar gum derivatives. Content of the polymer is 1/2 of the conventional polymer fracturing fluid; and the use of a polymer crosslinking metal-based crosslinking agent to increase the viscosity; Operating temperature 93 ~ 121 ℃; viscosity limit 400mPa · s / 100s-1, so as to obtain a long and thin cracks, but unlike that obtained with a solution of boric acid based gel short thick crack. Although the viscosity of this fracturing fluid is relatively low, but it is very suitable for hanging or carrying capacity of sand content is relatively high proppant. By 400 jobs in the field, to get the ideal stitch length and more thorough cleaning flowback.
The advantages are:
(1) can cause desired fracture length;
(2) costs than the polymer-free fracturing fluid is low;
(3) than the amount of conventional cross-linked guar gum fracturing fluid less 1/2, flowback better;
Reduction (4) degradation of the polymer damage.
The disadvantage is that when the sand filling, there are still minor injuries. Although the breaker can effectively reduce the molecular weight of the polymer, thereby reducing the viscosity of the liquid, but still contain cracks weaken diversion and discharge capacity of the polymer portion.
This fracturing fluid Utah Wasatch Formation (low porosity and permeability reservoirs) in the application and achieved good results.
2, guar gum can improve the low-borate fracturing fluid production of oil and gas wells
North American oil and gas companies have to increase crude oil production by reducing the concentration of the fracturing fluid borate crosslinked. Many companies use a borate crosslinked fracturing fluid, because such a system can produce a high viscosity, healing and re-formed under shear conditions, and is inexpensive naturally occurring borate as a main component. Borate liquid shear insensitive, crosslinking is reversible. Reducing the concentration of guar gum is intended to reduce the damage to the reservoir, and after fracturing a more thorough draining create conditions. Other studies have shown that completely drain blockage and reduce proppant can create better hydraulic fracturing  conductivity and increase production. Low guar gum borate fracturing fluid is a mixture of fresh water and guar gum, and by a single buffer - the crosslinked crosslinked fluid. You can simplify the use of buffer preparation work. Because the system was reduced by 30% to 40% of the colloid, so after fracturing proppants in the reservoir, leaving only insoluble residues and less colloid. Practical application shows that in three months after fracturing , oil companies increase the net present value $ 43,000.
3, HMP-quality water-based fracturing fluid
Micro polymer services company Halliburton developed a high-quality water-based fracturing fluid (HMP), the fracturing fluid is easy to recycle and can be reused many times. HMP is based on a short chain polymer, the polymer in the manufacturing process chemically cut, the final 20 to 30 times shorter than the original polymer. Fracturing fluid borate crosslinker is added. After pumping stops, reservoir rocks in the role of natural acidity, fracturing fluid can be effectively broken plastic. Flowback can be re-used.
The company said, HMP has the following characteristics: a reusable, saving money and reducing the amount of water used to solve the water problem; the crack length increases of 3 to 5 times the rate of increase yield and total reserves equivalent; drain efficiency doubled and without the use of the breaker; enhanced ability to carry proppant fracturing fluid filtration will decrease.
Since after the fracturing gel is pumped naturally break and restore its original viscosity, and therefore, without displacing the proppant, theOil fracturing proppant can be freely discharged back the wellbore, and then recovered by filtration and re-use. HMP using treated for subsequent stimulation not only economic, but also effective. This feature makes HMP is especially suitable for remote operation.

2013年12月20日星期五

Shale gas reservoir fracturing proppant settlement

Shale gas reservoir fracturing proppant settlement regularity and the experimental research on shale gas development is a system, a vast amount of engineering, its high technical requirements and more money. Horizontal well development and technology of hydraulic fracturing is the core of the shale gas development. Than with conventional guanidine gum fracturing fluids, gliding water to form complex fracture network, greatly improve the effect of well stimulation. As a result, the shale gas reservoir fracturing slippery water often used as a fracturing fluid, large displacement, low viscosity construction method. Low viscosity, but due to slippery water carrying capacity is poor, proppant settlement regularity with different conventional petroleum proppant gum fracturing fluid. At present, China about shale gas reservoir, fracturing proppant settlement rule research focuses on the theoretical aspects, construction technology and main draw lessons from foreign practices, or software simulation based on the experience, lack of effective means of experiment; Especially for gliding water carrier proppant settlement, the migration regularity of research is still in its infancy, lack the necessary indoor experiment and system theory to guide the shale gas reservoir fracturing design and construction. To this end, the author designed a model device, and through the device simulation gliding water carrier in the fracture process, studies the construction capacity, seam width, proppant sand particle size and viscosity of fracturing fluid and than within the fracture parameters such as Hydraulic Fracturing Proppants settlement and the influence of the conveyance speed, so as to provide reference for establishing reasonable construction parameters.